Doctor of Philosophy (Chemical and Materials Engineering)
- Duration
- The maximum time to complete the PhD program as set by the Faculty of Graduate & Postdoctoral Studies is six years.
- Subject
- Materials Technology
- IELTS
- 6.0 overall, no part below 6About the same overall: PTE Academic 47, TOEFL iBT 67, Duolingo English Test 105, Oxford Test of English 126.
At a glance
Summary by AIReading the course page…
Overview
The Department of Chemical and Materials Engineering offers facilities for advanced training and research leading to the Master of Engineering, Master of Science and Doctor of Philosophy degrees in Chemical Engineering and in Materials Engineering.
Show allShow less
Degrees are granted in Chemical Engineering, Materials Engineering, Process Control and Welding Engineering. Welding Engineering is not available at the doctoral level. The MEng degree is intended primarily for part-time students who are working in industry, but can also be taken by full-time students.
General fields for research in chemical engineering include fluid mechanics and rheology; reaction kinetics and catalysis; mass transfer and separation processes; heat transfer; thermodynamics, hydrocarbon P-V-T and phase equilibrium studies; polymer reactor engineering; computer process control; dynamic simulation.
Biotechnology, mathematical modelling and environmental engineering. Many research programs are oriented toward better utilization of natural resources in the province, e.g., upgrading of Athabasca bitumen and heavy oil feedstocks; processing of natural gas. Active research areas in materials engineering include mineral process
Entry requirements
The Department’s minimum admission requirements are an undergraduate degree with an admission GPA of at least 3.0 on the 4-point scale from the University of Alberta, or an equivalent qualification and standing from a recognized institution.
The admission GPA will be calculated on the last 60 units of graded coursework completed, or on the equivalent of the last two years of full-time graded coursework.
Show allShow less
Students applying to a PhD program directly from a BSc must have an average of at least 3.5 on a four-point scale in the last 60 units or two years of undergraduate or graduate work at the University of Alberta, or an equivalent qualification from a recognized institution.
For applicants with international qualifications, if the previous degree was not obtained from Canada, USA, UK, Australia or New Zealand, proof of English Language Proficiency is still required. Where applicable, applicants must provide proof of English Language Proficiency (refer to English Language Requirement ).
Any one of the following is acceptable: For tests written before 21 JAN 2026: 92 with at least 21 in each section or equivalent For tests written on or after 21 JAN 2026: 5 with at least 4.5 in each section or equivalent an overall band score of 7.0 on IELTS with at least 6.0 on each band a minimum overall score of 65 on the CAEL with at least 60 on each subtest a minimum score of 62 on the PTE Academic.
Applicants are also required to submit a CV, a one page Personal Statement, and should arrange for three references to be submitted. The Graduate Record Examination (GRE) is optional.
The Department will accept qualified applicants with degrees in other fields of engineering. Graduates with non-engineering backgrounds may be admitted under special arrangements which might involve t
English language requirements
| IELTS | 6.0 overall, no part below 6 |
|---|
a minimum TOEFL (internet-based) score of: For tests written before 21 JAN 2026: 92 with at least 21 in each section or equivalent For tests written on or after 21 JAN 2026: 5 with at least 4.5 in each section or equivalent; an overall band score of 7.0 on IELTS with at least 6.0 on each band; a minimum overall score of 65 on the CAEL with at least 60 on each subtest; a minimum score of 62 on the PTE Academic.
Fees
International students: CAD 10,518.72 per year full-time (2026-27 international thesis-based program fee; Fall and Winter CAD 3,506.24 per term, Spring and Summer CAD 1,753.12 per term) (standard fee)
UK students: CAD 5,022.12 per year full-time (2026-27 domestic thesis-based program fee; Fall and Winter CAD 1,674.04 per term, Spring and Summer CAD 837.02 per term) (standard fee)
Show allShow less
Domestic: CAD 5,022.12 per year full-time (2026-27 domestic thesis-based program fee; Fall and Winter CAD 1,674.04 per term, Spring and Summer CAD 837.02 per term) (standard fee)
International: CAD 10,518.72 per year full-time (2026-27 international thesis-based program fee; Fall and Winter CAD 3,506.24 per term, Spring and Summer CAD 1,753.12 per term) (standard fee)
Start dates
Fall, Winter
Application deadline
Domestic applicants: Fall application window: Nov. 1 – Aug. 15; Domestic applicants: Winter application window: Aug. 1 – Dec. 1; International applicants: Fall application window: Nov. 1 – Apr 1; International applicants: Winter application window: Aug. 1 – Oct. 1
Campus
- Edmonton, Alberta, Canada
If you studied in United States
193 countriesUniversity of Alberta has not published doctor of philosophy requirements for United States. See other levels
A counsellor checks your documents before University of Alberta sees them, then stays with you through your offer and visa.
Study in Canada
Our free guide: courses, entry requirements, costs, applying, your visa and life there, in one PDF.
Get the free guideSimilar courses
Materials Science and Engineering (PhD)
McMaster UniversityIELTS 6.5PhD/MPhil Materials and Physics Postgraduate Research
University of SalfordJAN 2027, IELTS 6.5Materials Engineering MPhil, PhD
Newcastle UniversitySEP 2027, IELTS 6.5Materials Science : PhD
Lancaster UniversityIELTS 6.5Metallurgy and Materials PhD / MSc (Res)
University of BirminghamIELTS 6.0More like this